I have a mysterious (although minor) leak that's originating from under this bolt:
The bolt is torqued down tight and is not bottomed out (I can see roughly 1/16" of unused threads on the other side of the case before the end of the bolt)
It took about 4-5 miles to get to the state seen in the photo. Has anyone had this happen to them and perhaps have a handy dandy hint on alleviating this issue?
This is the only leak on the entire engine so it's kinda driving me nuts.
![CIMG0741.JPG CIMG0741.JPG](https://motorbicycling.com/data/attachments/58/58121-d7b6b5d8612ad0bef118066198d79842.jpg)
The bolt is torqued down tight and is not bottomed out (I can see roughly 1/16" of unused threads on the other side of the case before the end of the bolt)
It took about 4-5 miles to get to the state seen in the photo. Has anyone had this happen to them and perhaps have a handy dandy hint on alleviating this issue?
This is the only leak on the entire engine so it's kinda driving me nuts.