Hello from socal

fx-2

New Member
Hello to one and all . I started this project last November . Well everything has went wrong the first time . Ordered worksman wheels in november got the right one in january ,sprocket adapter would not fit wrong lacing . The motor had broken cylinder at the base near the transfer port new out of the box . Ordered CDI and pipe was sent to wrong state . And last but not I order a Sportsman gas tank , guest what it would not fit the Worksman frame . Well this the project from **** . I must say all the people I've ordered from have worked with me to make thinks right. So the bike is a worksman INB with Monark forks , new set worksman wheels with front drum brake , Pirate sprocket adapter 44 tooth sprocket . The motor is a Jet the ports are cleaned up piston is reworked it has a Pirate manifold with a Dellorto 16-16 carb all the bearing replaced an a Jaguar CDI box . The last thing was the fuel tank I had to cut the lower tube out and replace it to fit the tank in the frame . A few Pic
 

Attachments

  • dscn0773.jpg
    dscn0773.jpg
    179.6 KB · Views: 157
  • dscn0774.jpg
    dscn0774.jpg
    196.4 KB · Views: 139
Dan I can't wait to see you riding that thing,an after all the adventures we've had sofar it just means there is more to come
 
Up date into paint now . Most of the build done . a few pic. Dan
 

Attachments

  • dscn0780.jpg
    dscn0780.jpg
    192.5 KB · Views: 151
  • dscn0781.jpg
    dscn0781.jpg
    184.3 KB · Views: 149
  • dscn0788.jpg
    dscn0788.jpg
    158.9 KB · Views: 141
  • dscn0779.jpg
    dscn0779.jpg
    197.4 KB · Views: 158
Last edited:
Got a lot done today . It's about 95 % done . Had lot of help on the bike from Turkman . With out him it wouldn't be as nice as it turned out . Thank you Bob . here some pic .
 

Attachments

  • dscn0790.jpg
    dscn0790.jpg
    200.6 KB · Views: 134
  • dscn0791.jpg
    dscn0791.jpg
    190.6 KB · Views: 138
  • dscn0793.jpg
    dscn0793.jpg
    194.9 KB · Views: 152
  • dscn0795.jpg
    dscn0795.jpg
    193.6 KB · Views: 139
Dan I can't wait to see you riding that thing,an after all the adventures we've had sofar it just means there is more to come
Bob I thank you for all your help an in site in this project . It been great fun . Getting ready for wind in the face and bugs in the teeth . lol Thank once more . Dan
 

Attachments

  • dscn0772.jpg
    dscn0772.jpg
    181.7 KB · Views: 144
Back
Top