I want YOUR Pics
- Thread starter weekend-fun
- Start date
Chip Foose could do it......LOL !haha, i would NOT want to mask/unmask that!
Laughs,
Salty
THE NOVI
Micargi 7 speed cruiser with 66 2 stroke motor- suspension fork and seatpost, BMX bars
I'm getting ready to take new photos- I've since added a 27 inch front wheel , double brake lever
THE STREET SEINE
Red Schwinn World Traveler now under construction with 49 cc slant, chrome tank and extended chrome muffler- single speed freewheel for minimal final weight, approx 37 lbs.
I like your videos on youtube!
Micargi 7 speed cruiser with 66 2 stroke motor- suspension fork and seatpost, BMX bars
I'm getting ready to take new photos- I've since added a 27 inch front wheel , double brake lever
THE STREET SEINE
Red Schwinn World Traveler now under construction with 49 cc slant, chrome tank and extended chrome muffler- single speed freewheel for minimal final weight, approx 37 lbs.
I like your videos on youtube!
Attachments
Last edited:
Heres mine, dont know what make the frame is or anything. found the frame in a friends shed about 4 years ago.
Its been raked a little bit so thats why the pedals hit the ground. Just the chinese 68.5cc engine with custom gas tank,
re-pop monarch springer and ladies schwinn hollywood bars.
Its been raked a little bit so thats why the pedals hit the ground. Just the chinese 68.5cc engine with custom gas tank,
re-pop monarch springer and ladies schwinn hollywood bars.
Last edited:
Here's some pictures I took yesterday- not the greatest of the bike with the new 27" wheel in front and the Campagnolo road brake on the front. A better roll and a better stopping brake.
On the road again...
On the road again...
Attachments
Thanks man! Its actually quite fast when its moving too. Ive hit 70kmh on this thing a few times, and not down hill
so.... what kind of difference between the slanthead and the straight head?Heres mine, dont know what make the frame is or anything. found the frame in a friends shed about 4 years ago.
Its been raked a little bit so thats why the pedals hit the ground. Just the chinese 68.5cc engine with custom gas tank,
re-pop monarch springer and ladies schwinn hollywood bars.
Theres a little bit more power but not much. I only run premium gas and opti 2 and that seems to make it haul though.
Here's mine.
70cc Chinese motor mounted on a bike I got at a thrift store. This is the second bike I've put it on. The first one was a poor fit.
I had bought a new throttle/button combo hoping to replace the old one that I broke, unfortunately, the second wire for it came off before I could hook it up... I'm either going to get an industrial switch or leave it as is, it dies on idle regardless as to what I do with the idle screw anyway.
I'd like to get a rear blinker and some new brake pads then I'm done.
The aluminum foil is to keep the plastic on the wires that sit next to the muffler from melting off, and the air filter is actually a piece of cheap sponge as I lost the old one. If you use a sponge, be sure to pull off any small loose pieces before putting on. You wouldn't want that stuff flying into your motor.
70cc Chinese motor mounted on a bike I got at a thrift store. This is the second bike I've put it on. The first one was a poor fit.
I had bought a new throttle/button combo hoping to replace the old one that I broke, unfortunately, the second wire for it came off before I could hook it up... I'm either going to get an industrial switch or leave it as is, it dies on idle regardless as to what I do with the idle screw anyway.
I'd like to get a rear blinker and some new brake pads then I'm done.
The aluminum foil is to keep the plastic on the wires that sit next to the muffler from melting off, and the air filter is actually a piece of cheap sponge as I lost the old one. If you use a sponge, be sure to pull off any small loose pieces before putting on. You wouldn't want that stuff flying into your motor.
Attachments
Last edited:
"Inverted color" in Windows paint program. Check it out.
Quote
"I'd like to get a rear blinker and some new brake pads then I'm done."
let me just say that I dont think Iam ever done! there is always something to do! one thing that gets overlooked is the pedals! yeah there actually foot rest, but I prefer to be able to stand on a good base.
"I'd like to get a rear blinker and some new brake pads then I'm done."
let me just say that I dont think Iam ever done! there is always something to do! one thing that gets overlooked is the pedals! yeah there actually foot rest, but I prefer to be able to stand on a good base.
Hey weekend, are you getting the pics for a reason, if so why? Anyway you can see about 20 of my builds on my site, go to the bike builds page and use what you want.
http://80ccmotorboys.com
Thanks Rob
ssorry to get off topic but John did you call us up the other day?
http://80ccmotorboys.com
Thanks Rob
ssorry to get off topic but John did you call us up the other day?
Well, weekend-fun as already written a very popular article in 'Make' magazine, then he tried his hand at makin' a cool lil vid on youtube - I think we've got ourselves a talented young journalist in the making here lol
http://motorbicycling.com/f3/make-magazine-article-about-motorbicycling-com-12162.html
and
YouTube - WeekendFunTheBiker's Channel
and... I'm late for work again because of this place lol /flees
and
YouTube - WeekendFunTheBiker's Channel
and... I'm late for work again because of this place lol /flees
I need a set of handle bars for my bike utf-8BSU1HMDA3NjguanBn.jpg picture by 247jude - Photobucket , utf-8BSU1HMDA3NjkuanBn.jpg picture by 247jude - Photobucket , I was thinking about long reach beach cruisers, but where to find them.