New profile posts

What's new Featured content New posts New media New media comments New profile posts Latest activity
P
Hello buddy its paul c from the u.k..I just got my 50cc engine BUT unfortunatly one of the double threaded screw bolts was damaged in transit..Can you give me any advice on gettin a new one.? Or were i could get one from..They are 3.4 mm in diamater any advice.??? Thanks Indian 22
  • Like
Reactions: indian22
indian22
indian22
Hi Paul. Is that one of the two "studs" that hold the exhaust pipe in place? If so I'd just buy a regular metric fastener at a local hardware. Don't over tighten these cause they will strip the block threads easily. Rick C.
kelly dean
kelly dean
i really dont like putting bolts into aluminum, i just needed extended exhaust studs for a rebuild i just bought 6mm bolts long enough and cut off the heads clean up the cut with a file then double nut and use locktite to put them in and you wont have to worry about stripping the aluminum.
kelly dean
kelly dean
In a worse case senario i have redrilled to tap and thread 8mm once again cutting off bolts for studs, of course i had to drill out the pipe flange to fit
F
Hey for your 79cc shifter build did you use the mounting plate that came with the kit, or a different one? Tried looking around to see if you've already posted it, and looking at your pics it looks like the sick bike parts mount that comes in the kit.
xXNightRiderXx
xXNightRiderXx
I did use Sick Bike Parts' four stroke mounting plate, but I had to drill it out to match the bolt diameter and pattern. It's built for the 49cc 4s engines, which has a tighter pattern than the 79cc.
M
After I install the sprocket on the back wheel. And but it back on. The wheel wont move now. It's a single speed beach cruiser.
P
Hello Rick..You answered my query on a sprocket adapter..I was thinkin of gettin a 44T one from Gas.bike from u.s.a do ya think there worth the extra money..Rather than ine of them Shite lookin/made ones from china.What do ya think rick..???
  • Like
Reactions: indian22
indian22
indian22
The best adapter is the 3 piece 3 bolt made by Sportsman Flyer here in the U.S. but I don't know if he has the 1" adapter, which is a relatively rare size here in the States for motorized use. His info is located in the vendor sidebars here on the forum as is Gas bike. You won't have many vendor options on the 1" size though. 44 tooth is the best all around sprocket.

Rick C.
Maphew
Im new to the site, n on my second build, just a thanks for the guidance this site and its members have supplied over the last year or so!
T
Wow is that a rebuild of an true indian? Or replica ietjer way she is a beauty
  • Like
Reactions: indian22
indian22
indian22
LOL thanks, but it's just my vision of what Indian could have built. Rick C.
Back
Top