Latest activity
-
FHere is the lawn edger that had this great motor on it. No the motor didn't have that air filter on it, I adapted that with a part of a...
-
FHere's the bike that I started with. Yes it's a women's beach cruiser. It was free and in good condition.
-
FHere is the results of years of collecting parts and building it in my free time. I'll be posting more pictures. I'll explain what I did...
-
MMotakitty replied to the thread Briggs 3hp stretch build.I also built my own muffler too after the stock one feel apart. I used a straight pipe and drilled small holes then added an larger...
-
MMotakitty replied to the thread Briggs 3hp stretch build.Also because I flipped the rear half upside down the drop outs became drop ups which was not good. So I fitted some plates that go...
-
MMotakitty replied to the thread Briggs 3hp stretch build.I don't recall why I took this but here's a shot of my front disc setup. It does so the bike pretty well.
-
-
MMotakitty replied to the thread Briggs 3hp stretch build.Here it is fully ready for its first test ride. The drive chain cover is from a planter box just cut down. I added a front caliper brake...
-
-
MMotakitty replied to the thread Briggs 3hp stretch build.I got it in primer for now. Mainly to keep it from rusting and plus flat black is my favorite color. I bought a jackshaft kit which fit...
-
-
MMotakitty replied to the thread Briggs 3hp stretch build.I got the engine on there. I just cut the original mounting plate the engine was on and weekend that straight to the frame and added...
-
-
MMotakitty replied to the thread Briggs 3hp stretch build.And here it is all together as a regular bike. I did this for a test ride. I wanted to make sure it functioned as a bicycle before...
-
-
MMotakitty replied to the thread Briggs 3hp stretch build.Fully welded up and I added a webbed brace to the front headstock and some bracing to the bottom of the seat tube. The seat tube is also...
-
-
MMotakitty replied to the thread Briggs 3hp stretch build.All welded up except for the rear top bars.
-
-
MMotakitty replied to the thread Briggs 3hp stretch build.Mocking up the top bar. This bar came from one of those kid trailer bike things. I had to remove a riser from the tube and patch two...
-
-
MMotakitty replied to the thread Briggs 3hp stretch build.Here it is all chopped up in my crudely constructed bike holder. It actually worked out great. I've since cut it down to just got one...
-
-
MMotakitty replied to the thread Briggs 3hp stretch build.Here is the lawn edger that had this great motor on it. No the motor didn't have that air filter on it, I adapted that with a part of a...
-
