Wider Crank For Occ Chopper

datonamanmike

New Member
anyone know where i can get wider crank for OCC chopper
now that i have offset my motor i need wider crank
i may also want to go with pull start witch would
need wider crank
thanks
 
Sick Bike Parts has a wide crankset for sale on their website (this is the same set that comes with the shifter kit). It uses a wide spindle.

I recently installed a pullstarter too, and I found that the SBP spindle was not wide enough to accomodate it. Unfortunately the cranks that come in this crankset are aluminum, and thus not good for bending...

So I talked to the guy at my local bike shop, and he sold me a set of steel cranks that were the same length. I bent the left one outwards in a bench-vise, using a pipe slipped over the other end for leverage. Now it clears the pullstarter with no problem.

(You could probably just bend out a set of steel cranks like this even without the wide spindle from SBP...)
 
Probally not, i guess you will have to look for a wide 3-piece crank,try looking at the venders that sell engine kits.I've seen one someone,but i will look for a link.
 
Back
Top