whizzer speedometer woes

outlawbiker

outlawbiker

Member
i didnt know where else to post this so i hope im in the right area. this question goes out to all you whizzer people. im looking to buy a analog whizzer speedo for my chopper 2 stroke bike. every place i look for a regular analog bicycle speedo say they are garbage on a MB, but the whizzer ones hold up, so im wondering what would i need to get a whizzer speedo to work on my bicycle,my front tire is a 24 inch also. thanks for any advice.
 
Hi Outlawbiker,

Whizzer did make a decent speedometer, but the key word is "did". I had several of the Whizzer units have problems around 2500 miles, but most hold up well.

The speedo was geared for a 26", but was off about 10% on a 24".

Sorry, but I don't have any for sale.


The plastic unit on EBAY has a hard problem with motor vibration and soon becomes impossible to read with the needle shaking so much.

Have fun,
 
Quenton Guenther said:
Hi Outlawbiker,

Whizzer did make a decent speedometer, but the key word is "did". I had several of the Whizzer units have problems around 2500 miles, but most hold up well.

The speedo was geared for a 26", but was off about 10% on a 24".

Sorry, but I don't have any for sale.


The plastic unit on EBAY has a hard problem with motor vibration and soon becomes impossible to read with the needle shaking so much.

Have fun,
Click to expand...

thank you for the advice, is there another alternative out there like maybe converting a moped/ small motorcycle analog gauge or am i doomed to the digital world?
 
Hi Outlawbiker,

Might be worth the effort to try to find a Whizzer dealer with one of the better speedometers in stock.

I am going to the major motorbike show in Portland, IN next week [July 12-16] and I will ask around to see if anyone has any left in stock.

Have fun,
 
Problem with a motorcycle or moped speedo is they're set to run off 17"-20" wheels and off a gear drive on the hub. I have a front moped hub I plan on lacing into a 24" wheel and it has a VDO gear drive right on the hub just too bad I can't use it. :(
 
Quenton Guenther said:
Hi Outlawbiker,

Might be worth the effort to try to find a Whizzer dealer with one of the better speedometers in stock.

I am going to the major motorbike show in Portland, IN next week [July 12-16] and I will ask around to see if anyone has any left in stock.

Have fun,
Click to expand...

thank you for your help once again,if you come across anything please dont forget me. i allways check my private messages here and feel free to shoot me one if anything comes up. ultimately im gonna need everything from the gauge down to the gears or whatever,but as long as i can get the parts and get it to work ill be a happy camper.
 
Last edited:
I think I may just have to send the seller some emails, they for mini gas choppers that have a 49cc motor but from every picture I've seen of the choppers there's no cable going from the front wheel to the speedo.

They also have these for $90, purdy!
PTtank8000_500.gif
 
If digital world this is the best one that I have found out for me for mine mountain bike. It work off a ring of magnets not like a one single magnets. one time I was trying to make a rpm tach out of one and can work.

They use to be easy to by. Down the road I will have to buy one if I make a chinia girl.


Cyclometers
 
You must log in or register to reply here.
Back
Top