Splitting Huasheng 49cc case

Discussion in 'Instructions for Building and Repairing Motorized ' started by haoleboy, Sep 13, 2018 at 1:36 PM.

  1. haoleboy

    haoleboy Member

    Joined:
    Feb 17, 2012
    Messages:
    81
    Likes Received:
    0
    Hello! I have a motor that I need to split the case to see what damage I have. I have a damaged spark plug electrode, so I figured I have a broken connecting rod and or bearing cap. Since the top of the piston has hit the spark plug, I will have to replace the piston and other parts. I have removed the motor from the bike of course, removed the transmission, the pull cord assembly, and I need to crack the case to repair it. I don't want to start prying on anything, so if I can be advised on how to do this safely, I would appreciate it!!!
    Thank you very much!! David
     
  2. CrazyDan

    CrazyDan Member

    Joined:
    Apr 9, 2018
    Messages:
    38
    Likes Received:
    9
    Borrow a steering wheel puller from autozone to remove the flywheel.
     
  3. haoleboy

    haoleboy Member

    Joined:
    Feb 17, 2012
    Messages:
    81
    Likes Received:
    0
    That is just what i am going to do tomorrow...... thank you for you reply!!!
     
  4. haoleboy

    haoleboy Member

    Joined:
    Feb 17, 2012
    Messages:
    81
    Likes Received:
    0
    thank you Dan
    Dan, I replied to you in "the other site"
     

Share This Page