Spark plug problem
- Thread starter Mjkx8
- Start date
droc089
New Member
You can try and grind down the cap on the spark plug. my kit had the same crap, why send a cap that doesn't even fit. In the process of trying to make it fit I destroyed it, ripped it off the wire and mashed all the plastic where you stick the plug. Now it won't fire, yeee haaaw yet another problem to fix. I actually bought this to be kind of a learning tool and a way around.
You don't need to "grind" anything. The small cap at the top of the plug will unscrew leaving a threaded post that the kit supplied plug boot will fit. Some of the caps are tight so you might need small vice grips to unscrew it but they all come off. No grinding required on anything.
A better suggestion is to replace the kit plug boot with a good automotive grade boot that will fit any plug without removing anything.
Tom
A better suggestion is to replace the kit plug boot with a good automotive grade boot that will fit any plug without removing anything.
Tom
DaveC
Member
Some makes of plugs you can't screw the top off of, it's part of the center electrode. NGK you can.
And the spark plug wire should be replaced as soon as possible. sick bike parts has a good one. To remove the wire you just unscrew it from the CDI. There are reports of the Chinee epoxying the wire in now, you have to dig it out.
The plug wire boot looks to be made in a toy factory. Unlike anywhere else in the world the boot/wire is made from 6 parts to replace what we make from 3. :/
And the spark plug wire should be replaced as soon as possible. sick bike parts has a good one. To remove the wire you just unscrew it from the CDI. There are reports of the Chinee epoxying the wire in now, you have to dig it out.
The plug wire boot looks to be made in a toy factory. Unlike anywhere else in the world the boot/wire is made from 6 parts to replace what we make from 3. :/
Last edited:
