Spark Plug Clerence

Bikeman08

New Member
Jun 19, 2008
42
0
0
Hello bikers, has anybody had any problems tightning the spark plug. I have very little space in betwen the plug and upper bike frame. any suggestions??????
 

Bikeguy Joe

Godfather of Motorized Bicycles
Jan 8, 2008
11,843
237
63
up north now
Put it in finger tight, then use a GOOD pair of needle nose pliers, or better yet, needle nose vicegrips to tighten the plug. Don't try tightening it by the porcelain part, or the tip!!!

An offset box end wrench will work if youhave one....I don't.
 

Bikeman08

New Member
Jun 19, 2008
42
0
0
ok bike guy thanks man, hey i broke the stock spark plug and i bought one of the ones i saw to get on the site champion L86c the only things is the plug is to big for the spark plug wire rotfl
 

Bikeguy Joe

Godfather of Motorized Bicycles
Jan 8, 2008
11,843
237
63
up north now
Yeah, it's probably got a tip that doesn't unscrew. If you replace the wire and cap with a good automotive part (7mm) then you can use either type of plug and have a hotter spark.