So my first build is a Felt but need some help

[movi]

Where are you guys getting this syringe to get the JB weld to seal the holes for the tank? I bought the INDUSTRO pack of JB weld but have no idea how to apply it to the holes in the tank. Any help is greatly appreciated.

 

[Bikeguy Joe]

Jb weld won't seal a hole in the tank....for very long. You don't need a syringe to apply it anyhow.

 

[PutsTheDUIinRUINED]

I asked the same question about a month/two months ago...there is a foam/epoxy trick that apparently works great. Search for the thread, I'm sure you can hunt it down pretty easily.

 

[Bikeguy Joe]

....well there's a couple of resins that work, but not if you have ANY alcohol in the gas.
Pilot Supplies, Avionics, and Homebuilt Aircraft Parts from Aircraft Spruce and Specialty Co.
Try the vinyl ester resin, or call them and ask, they are very helpful.

 

[Bikeguy Joe]

I have used polyester resin and it leaks eventually, so does jb weld and seal-all

 

[GoFastBicycles]

Sounds weird but trust me on this I searched last weekend for the answer and this is how they do it. You need to google this Hblocal it will take you to the other motor bike forum. Hblocal is his member name he gives step by step on how it is done. Don't shoot the messenger

Adam

 

[movi]

I have read the thread by hblocal and that is why I am looking for this syringe. I will use a tank sealer after the jb weld. The jb weld is to basically seal the holes so that I can do the resin and not have it leak out the top tube

 

[GoFastBicycles]

I guess I would ask Hblocal about the details. My mistake

Adam