Second build.. I need something different

[donb4103]

Both wheels....just lousy bearing sets!!

 

[killercanuck]

Yea, jackshaft chain on the bigger outer sprocket. To the derailleur on the inner.

Getter rolling good, then set your right pedal up at just past 1:00, then release the clutch, stand up and jump on the pedal and follow through with your left leg as you sit down. It'll feel akward at first, but you'll get used to it.

Don't forget to shift back to 1st gear when you come to a stop.

gl.

 

[donphantasmo]

It's working a lot better now. I just have a hard time keeping the retaining screws that keep the jack shaft sprockets from loosening. I'm going through one per day. I'm going to start red locktite.

 

[killercanuck]

for those little keys, put a small wrench on the allen key to give you ten times the leverage. Even a 10mm helps. Use the box end of the wrench, know what I mean?

 

[donphantasmo]

I put blue (removable) locktite on it yesterday. Waiting on weather so I can test it out.

 

[maniac57]

for those little keys, put a small wrench on the allen key to give you ten times the leverage. Even a 10mm helps. Use the box end of the wrench, know what I mean?

This works well, but be careful not to strip the setscrews, A better way is to replace the allen heads with actual bolts if there is room. Much easier to tighten right and lock with blue locktite.