New 4G T Belt Drive Engine Kits

Terry Blow

Terry Blow

Dealer & Custom Builder
New 4G T Belt Drive Engine Kits $300 USD

2010 4G T Belt Drive 5:1 ratio with Huasheng 49cc 4 stroke $395. USD and free shipping in the Continent US only.
30 day manufacturer warranty and 6 month supplier warranty.

PM me if interested
Terry

YouTube - Grubee 4G T Belt Drive Performance Test 01


YouTube - Grubee 4G T Belt Drive Performance Test 02


YouTube - Grubee 4G T Belt Drive Performance Test 03


YouTube - Grubee 4G T Belt Drive Performance Test 04


YouTube - Grubee 4G T Belt Drive Performance Test 05
 
Last edited:
Hate to do this but I can't give these kits away forever so I am only going extend this offer untill Aprill 1st 2010.

Terry
 
This kit comes as a complete kit I have been told by my supplier that the next shippment will have drive alone but for right now No. I can ship any where including Ontario Ca
 
I had a forum member ask me for trans dimensions so I thought why not post them here for reference

SANY0200.jpg 3 inches

SANY0201.jpg 11 inches

SANY0202.jpg 7 1/2

SANY0203.jpg cover to sprocket 4 3/4 inches
 
Last edited:
Re: New 4G T Belt Drive Engine Kits $300 USD

As I stated in another thread, I've seen your test vidios. I was wanting to know what
was the sprocket size on the rear tire in the tests. I would like to know so I would know what I would need to order.
 
The sprocket that was used it the videos was a 50 tooth. If you are wanting more speed I have been told that every one tooth smaller on the rear will give you one mile per hour. So a 40 tooth should get you 40 MPH but that is unconfirmed. If you want you can order a front 10 tooth non free wheeling and 36 tooth rear sprocket that would be close to 40 MPH and it would give you engine braking and a nice small sprocket in the rear would look sharp.
Terry
 
Last edited:
Well I may as well give the rest of the measurements here you go

1. Engine and trans width is 10 3/4 inches say 11"
2. Hight from mounting plate to top 9 3/4 inches say 10"
4. From the front of the engine to back of the trans cover 10 3/4 inches say 11"

SANY0213.jpg

SANY0215.jpg

SANY0218.jpg

Terry
 
Here is the email I promised from my supplier.
(Quote Terry,
I hope this email reaches you ok; I have been having a lot of trouble with my email the last couple days. Our shipment maybe in sooner that I expected, I got a call yesterday about the details and it is currently in port meaning we could have it as early as next week. I will keep you informed as I learn more.
Thanks, Quote)
So I would say that I will not see these kits for another two weeks that is my guess hope this makes a few people happy
Cheers
Terry
 
hello there terry just wondering if you would ship one out to sudbury ontario canada for i'm in need of one for long range touring.Please p.m. me as soon as possible.xct2cflg
 
Hello members, just ordered a 4g from Terry Blow, could not have been smoother. I was having trouble with my paypal transaction and called Terry by phone, he could not have been more helpful. Even received a call back regarding transaction. Cant wait to receive the kit. Thanks again Terry for all your help. scratg
 
Thank you chopperjoe
You should get your kit by Monday and I am glad to hear you are happy with the transaction I can't wait to hear what you have to say after you have installed your kit and tried it I know you will be amazed by it.

Terry
 
Last edited:
ALL SALES ON THIS ITEM ARE ON HOLD UNTILL FURTHER NOTICE. The 2009 4G T Belts are sold out and the 2010 kits may have a price increase
 
OK so here we go the price on the
4G trans alone for the tapered shaft is $130. USD
4G trans alone for the 5/8 shaft is $150. USD
4G T Belt Drive Engine kit complete 5:1 ratio $395. USD
Plus Free shipping over $100 USD in the continental US only
For those of you that are converting from a stage II or stage III Honda or Huasheng you are going to need a three piece wide crank $30. USD And One piece to a three piece conversion kit $35. USD = $65. USD
If you are ordering a Transmission alone you will need to order the Spanner Wrench is an Extra $7.00 USD

Terry
 
Last edited:
Here Is The Latest Information On The 2010 4G Transmissions And Engine Kits They Are All 5:1 Ratio Not 4:1 And Have Only Minor Improvements
Terry
 
terry you have a free wheel 11 teeth and a 36 rear sproket will that work and a bout want would the speed Thank you Dwayne
 
Hi Dwayne
I do have the 11 tooth and the smallest sprocket I can get you is a 44 tooth and you speed would be 37.5 MPH if you could find a 36 tooth your speed would be 45.9 MPH. Now you have to know the most speed you can generate with 2.5 HP is about 35 MPH I did hear some one say they made it to 37 MPH. You can go with a 44 tooth but your going to have to pedal at the start because 2.5 HP just is not enough are you needing a rag joint sprocket or a HD Axle sprocket???
 
You must log in or register to reply here.
Back
Top