Magneto... Oops can someone help?

Discussion in 'Lighting and Electrical' started by Wags, Aug 23, 2016.

  1. Wags

    Wags New Member

    Joined:
    Aug 4, 2016
    Messages:
    32
    Likes Received:
    0
    So, unsoldered my magnito to get it out easier with the intention of eliminating the white wire all together. Now I don't remember if the blue wire went on the top terminal or the bottom. Also, the black ground wire that usually gets screwed on the magnito using one of the four bolts. Can I just solder that black wire to the little wire that comes out of the side of the magnito and is soldered to the body that the magnet spins in? I hope my question isn't too confusing. By the way the white wire has been eliminated. Lol
     
  2. BobbyT

    BobbyT Member

    Joined:
    Mar 16, 2014
    Messages:
    163
    Likes Received:
    6
    Blue wire goes on top. Put the black wire back on the screw.
     
  3. Wags

    Wags New Member

    Joined:
    Aug 4, 2016
    Messages:
    32
    Likes Received:
    0
    Thank you sir.
     

Share This Page