Looking for a 48T Freewheel Sprocket

ZnsaneRyder

ZnsaneRyder

New Member
I'ver searched around, and found old posts with outdated weblinks, so I would like some input from other members.

I'm building a gas bike that's chain powered, I'm using a big 80cc 4-stroke engine, so I'm going to use a 24-inch Solid Plastic 7-spoke wheel with both left and right hand freewheel threads for strength. Only problem is that Staton sells only a 16T freewheel for this bike wheel.

However, to get my required gear reduction, I'd prefer a 48T freewheel, and want the ability to pedal without rotating all my chains and centrifugal clutch while the engine is off or idling.

This would be my 2nd motored bike, I'm not interested in a kit, I'm going DIY the whole way, and want a more reliable ride than before.

So who would have a good 48T freewheel sprocket setup for the planned wheel?

Thanks
 
I'm wanting to finish this bike soooooo bad, just not sure exactly how to get the right wheel/sprocket combo I'm looking for.
 
Last edited:
Technocyclist said:
Try this freewheel:


But I think you might have to modify your 48 teeth sprocket to fit the freewheel. Probably just drill 4 holes to match the freewheel.
Click to expand...

Now I've seen that freewheel before online.....

Does that freewheel go on the LEFT side of the wheel? That 4-hole pattern is common and easy to get go-kart sprockets for, however I'm sure that is for a right-side wheel sprocket.
 
ZnsaneRyder said:
Now I've seen that freewheel before online.....

Does that freewheel go on the LEFT side of the wheel? That 4-hole pattern is common and easy to get go-kart sprockets for, however I'm sure that is for a right-side wheel sprocket.
Click to expand...

Grubee makes a similar universal freewheel that is left hand threaded to fit their rear hubs. I'm not sure that it will fit the Staton wheel/hub you are using though? Bicycle Engines, Motorized Bicycles, Bicycle Motors, Motored Bikes: 2-Stroke & 4-Stroke Kits! sells them and I believe just recently got them back in stock.

ocscully
 
another seller in Ebay for a freewheel on the left side:
FREEWHEEL Rear Axle kit for bike bicycle engine kit Item number: 300271314429
 
ocscully said:
Grubee makes a similar universal freewheel that is left hand threaded to fit their rear hubs. I'm not sure that it will fit the Staton wheel/hub you are using though? Bicycle Engines, Motorized Bicycles, Bicycle Motors, Motored Bikes: 2-Stroke & 4-Stroke Kits! sells them and I believe just recently got them back in stock.

ocscully
Click to expand...

I'm wondering the same, if the 48T from bicycle-engines will thread on to the staton wheel.

I emailed them, but still waiting for a reply.

Thank You,
ZnsaneRyder
 
ZnsaneRyder said:
I'm wondering the same, if the 48T from bicycle-engines will thread on to the staton wheel.

I emailed them, but still waiting for a reply.

Thank You,
ZnsaneRyder
Click to expand...

I've been told that you have to call them....they never answer e-mails
 
Technocyclist said:
another seller in Ebay for a freewheel on the left side:
FREEWHEEL Rear Axle kit for bike bicycle engine kit Item number: 300271314429
Click to expand...
I just ordered the 50 tooth freewheel hub... What's a good source for 12 guage spokes? Are the lengths standardized for 26" 36 spoke wheels? Thanks, ~Nashville Geoff
 
You must log in or register to reply here.
Back
Top