Lawmower engine friction drive idea.. sellers look.

Discussion in 'Motorized Bicycle General Discussion' started by Roadkill, Feb 22, 2009.

  1. Roadkill

    Roadkill New Member

    Joined:
    Feb 14, 2009
    Messages:
    242
    Likes Received:
    0
    Hello.. I'm Mr. dead...

    Please look at the attached file and feel free to elaborate or redesign or post links pictures of something already like it. I forgot to put that a chain could replace the downward shaft with a tensioner. Anybody could build the box with a welder it is the gears we all would need.

    I am attaching a rough idea and allow anyone to use this idea freely from now on.. That it matters.. Not for one person but for all to use and produce..
     
  2. Roadkill

    Roadkill New Member

    Joined:
    Feb 14, 2009
    Messages:
    242
    Likes Received:
    0
    Here is attachment for above post.
     

    Attached Files:

  3. Rayzor

    Rayzor New Member

    Joined:
    Feb 14, 2009
    Messages:
    74
    Likes Received:
    0
    the improvised gear box would be a tricky build. why not a horizontal lawnmower engine and just counter balance that with something on the other side?
     
  4. toytime

    toytime New Member

    Joined:
    Mar 20, 2008
    Messages:
    550
    Likes Received:
    0
    Interesting idea, those kinds of engines are a dime a dozen.
    I wonder if it would be easier to mount the engine as a "sidewall scrubber", that way , you would not need the gearbox you describe. I've seen one out there that had a freewheel runner on the other side of the wheel sort of sandwiching the wheel to keep it centered.
     
  5. Large Filipino

    Joined:
    Jul 22, 2008
    Messages:
    656
    Likes Received:
    0
    There's a link here somewhere where a guy did just that. He used two rollers. One for the drive laid against the side-wall and two free rollers on the other side. I believe that on his design the driveshaft was the actual roller and he had a sort of lever spring loaded acted like a clutch pivoted the engine to engage and disengage.
    With some thinking it wouldn't be too hard to use a hand clutch and have the spring take the pressure when it's engaged and the hand clutch when pulled disengages it.
    Yea lawnmower engines have some power,man.

    Ha! Here it is:

    http://motorbicycling.com/31476-post25.html
     
    #5 Large Filipino, Feb 22, 2009
    Last edited: Feb 22, 2009
  6. capturedbyrobots

    capturedbyrobots New Member

    Joined:
    Jul 24, 2008
    Messages:
    26
    Likes Received:
    0
    Or...
    Just mount a 2 stroke lawn mower on it's side,
    and use a diaphragm carb if it doesn't have one already.

    2 strokes can usually run in any orientation.
    Direct drive baby!
     
  7. toytime

    toytime New Member

    Joined:
    Mar 20, 2008
    Messages:
    550
    Likes Received:
    0
    Thanks Large, I'd never seen that one.
    Anyone can pick up a lawnmower for ten bucks and spend a day messing around with a rear rack "thingy"
    I think I'll start a company called Slick Bike Parts and sell em for $125.99 shipped!
    Who wants the first one? Too bad I'm just a dreamer....lol
     
  8. toytime

    toytime New Member

    Joined:
    Mar 20, 2008
    Messages:
    550
    Likes Received:
    0
    Not a bad idea Captured, not bad at all. That's what gets me about this hobby. The things that people have come up with in the short year or so that I've been around, it just blows me away!
     
  9. Roadkill

    Roadkill New Member

    Joined:
    Feb 14, 2009
    Messages:
    242
    Likes Received:
    0
    .cptr.

    Hey Ray.. Yeah that is why.. I see them everywhere and I bet the 2 or 3 hp are almost useless for grass but would whip some "@$$" on a MB.. Did I just think that up or am I one? Better get a tootsie roll.

    Thanks for the post



    Yeah that might work but I want the thing centered. I imagine your idea might work on a side pivot hinge and would always run on a slight angle (if centered) and probably always on the rim through a mountain rack style mount.. I can only imagine what a warped tire will do.. I might start that thread in a minute...

    thanks!


    I will check that out.. Thanks to you as well. Now can we convince him or her to give us the Biclear secrets???


    Yeah the DMV buys em up because they cut on hills and last forever.. Too heavy for me. Saw The Blue Meanies a zillion times and CBR twice once at the fireside.. Good show mate!

    If it is quality I would buy one. I am gear illiterate. I am getting very tired of being this way.

    Thanks Ya'll.. Feel free to create one if you can.. I used to wourk for "The world's largest" Kawa,Suzuki,Yama hahahaha dealer in the midwest or the world in the 90's and we would occasionally sell a shaft.. One day JoJo asked me to hold something.. It was a live coil.

    Cheers

    .cptr.
     
  10. Rayzor

    Rayzor New Member

    Joined:
    Feb 14, 2009
    Messages:
    74
    Likes Received:
    0
    Dang someone using 3 rollers... wouldnt that put excess wear on it?
     
  11. capturedbyrobots

    capturedbyrobots New Member

    Joined:
    Jul 24, 2008
    Messages:
    26
    Likes Received:
    0
    Oh no, someone here who knows my history!!!!
    Fireside will live in my memory until I die.
     
  12. Roadkill

    Roadkill New Member

    Joined:
    Feb 14, 2009
    Messages:
    242
    Likes Received:
    0
    I am the humanoid optiscope with record.
     
    #12 Roadkill, Feb 22, 2009
    Last edited: Feb 23, 2009
  13. Roadkill

    Roadkill New Member

    Joined:
    Feb 14, 2009
    Messages:
    242
    Likes Received:
    0
    I GOTTA SEE YOUR MB!!!! LOL You might present it to George Noory if it is as good as I think it might be.. LOL
     

Share This Page