Is my engine ok?

Caramanos2000

New Member
Despite having re done my fenders with all new stronger hardware, they failed.... The rear fender jammed between the seat post and tire, tire locked up and I skid.... It pulled the rear tire forward but I can align it again with no issues... Do you guys think my engine is ok? Im curious if the tire locking up and stalling the engine might have caused problems or not... forgot to mention engine is a 66c china kit.
 
Despite having re done my fenders with all new stronger hardware, they failed.... The rear fender jammed between the seat post and tire, tire locked up and I skid.... It pulled the rear tire forward but I can align it again with no issues... Do you guys think my engine is ok? Im curious if the tire locking up and stalling the engine might have caused problems or not... forgot to mention engine is a 66c china kit.

The rear is better than the front. I had a front lock up at 20mph and tossed me over the bars. My scabs are just now healing, so make sure you have a front bracket to go along with the rear and center bolt mount. Your engine will be fine..
 
The rear is better than the front. I had a front lock up at 20mph and tossed me over the bars. My scabs are just now healing, so make sure you have a front bracket to go along with the rear and center bolt mount. Your engine will be fine..

Thanks man makes me feel kinda better. I had taken the front fender off, wasnt gambling on that one. I had the proper leathers pants, jackets on and even had a full face helmet. My bike skid sideways and I skid with it, went down at 27 mph according to my speedo, had a little rash on my behind but thankfully I am otherwise fin.
 
engine should be fine. locking the rear wheel is more or less the same thing as doing a big skid, as long as the fender, wheel, or chain didn't bind up in the gear, it should be fine.
 
Back
Top