how to put togeather a high performence carby??

[motorized kodiak]

hey every one, can any one help me with putting my throttle line in the slide of my carby, its a high performance flatslide one, this is what it looks like http://www.ebay.com.au/itm/281153284936?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649 THanks!

 

[2door]

Did you get the throttle cable with it? That carburetor, same as the RT, requires a special cable. The free length is longer than the CNS or NT cable. They are a little tricky if you've never done one but essentially the concept is the same as other carbs. The soldered ferrel slides into a notch and you have to fight the spring to assemble the cap onto the body and secure it with the two screws.

Tom

 

[BonusParts]

Did you get the throttle cable with it? That carburetor, same as the RT, requires a special cable. The free length is longer than the CNS or NT cable. They are a little tricky if you've never done one but essentially the concept is the same as other carbs. The soldered ferrel slides into a notch and you have to fight the spring to assemble the cap onto the body and secure it with the two screws.

Tom

You can exchange the angled adjuster for the short one off a stock carb and use the original cable without cutting the sheathing!

 

[motorized kodiak]

thanks for your input mate, but that didnt work, how many mm or metes does the cable have to be?

 

[motorized kodiak]

Does this carby come with a needle that you can take out like the nt??