how to install front forks?

rsdoherty88

rsdoherty88

New Member
So...I just broke the front fork on my mountain bike going over a jump and landing too hard. I want to upgrade to a shock fork. Will any work or are there different sizes and thicknesses to be considered? And are there any specialty tools required for replacing the fork?
 
No special tools that I can think of but you will need the steering tube to match the frame and possibly a new head set (Bearings and races for the forks). Keep the old fork so you can match up the length.
 
Finfan said:
No special tools that I can think of but you will need the steering tube to match the frame and possibly a new head set (Bearings and races for the forks). Keep the old fork so you can match up the length.
Click to expand...

How will I know if the new fork steering tube I buy will match the the frame? Do I measure the diameter?
 
Yes measure diameter and length, there is also threaded and threadless. Easy to determine, if it has threads at the top then it is threaded. Here are some inexpensive suspension forks. If your old ones, threaded, 1 inch diameter and your head tube is shorter than 4.5 inches they will work.
www.NYCBikes.com
and
www.NYCBikes.com
 
FTR. Changing out the forks really is easy. My dad has a mountain bike with shocks and I took his off and tested them on my bike and it was super simple!

BTW, riding around with front shocks makes riding way more fun. It's more comfortable, and it can pull wheelies a lot easier! I highly recommend it. I just ordered some off of the NYC site.
 
You must log in or register to reply here.
Back
Top