homemade supercharger project

I had quite a pile of broken parts when I quit trying. Doesn't take long for the weak parts to appear when you start spinning things that fast.
 
how about taking an old motor, sealing off the ports, and put one-way valves, in the top of the head. Use the piston and cylinder of an old larger engine to pump measured CC's into a running china girl. Like the 68CC engine pumping air-fuel into a 49 CC engine with the crank-shafts synchronized.

One supercharger method is delivering discrete measured pulses versus a constant blow/squash. I also remember we lowered the compression ratio. big chev 454 I think at 7-to-1 with 14 lbs boost presure at the manifold. I cant remember ther numbers.
 
bowljoman said:
how about taking an old motor, sealing off the ports, and put one-way valves, in the top of the head. Use the piston and cylinder of an old larger engine to pump measured CC's into a running china girl. Like the 68CC engine pumping air-fuel into a 49 CC engine with the crank-shafts synchronized.

One supercharger method is delivering discrete measured pulses versus a constant blow/squash. I also remember we lowered the compression ratio. big chev 454 I think at 7-to-1 with 14 lbs boost presure at the manifold. I cant remember ther numbers.
Click to expand...

Someone already has one Bowljoman, but it's based on a 4 stroke, it's called a FIVE stroke. There's a vid on youtube:http://www.youtube.com/watch?v=-yo6xuVS7tg
 
You must log in or register to reply here.
Back
Top