Help with some stuff i bought please

[Huffydavidson937]

So i bought a sprocket hub adapter and the f2 thruster pipe for my matte blue huffy davidson i have 12 g spokes but have read alot about these slipping is there anything i can do to be absalutely sure it wont slip...my bike is a huffy cranbrook with the flying horse 80/66cc runs great just trying to find better ideas for mods and cosmetics thanks guys keep on ridin

 

[wrench]

Hub adapter, Ya might have to file the adapter ends so it clamps on the hub tight
If ya drill and tap a couple set screws into the adapter to hub it will help the adapter from slipping.

 

[JerryAssburger]

I had to really reef on the clamp bolts to get mine from slipping... always better than the rag-joint!

 

[Rusty_Nail]

I have the same bike. I have a 32t sprocket adapter on mine, its never slipped on me once. The rear hub if I remember right is 1.5" diameter. Mine bolted right on. Gives spot on alignment with the motor. Again just from my experience tighten the bolts good.