help please!!!!!

[isael123go]

hello my name is isael i own a beach cruiser the chain is stuck and the back tire wont move at all even when i hold the clutch. any sugestions ?

 

[GearNut]

Welcome to the forum!
Read this recent thread.
I bet your situation is the same as willell's.
http://motorbicycling.com/showthread.php?t=41147

 

[isael123go]

thanks but i just have one problem im pretty sure that the three screws on the plate are striped i did not assemble the bike so i dont no to much about it when i purchased it it ran fine but now this.

 

[2door]

"three screws on the plate are striped" Are you talking about the screws that hold the clutch actuator/sprocket cover on?

Explain please.

Tom

 

[GearNut]

If they are totally stripped, carefully drill the heads off of them. Slip the cover off the remaining stubs, and unscrew the stubs from the case.
Install new quality screws obtained from a hardware store, or do yourself a favor and get a hardware kit from SBP and do away with all the cheap junk hardware that the kits come with from the factory.
http://www.sickbikeparts.com/catalo...ducts_id=43&osCsid=o9fjujj2iisa5t7gc3jvnj9pd7

 

[isael123go]

the three screws that hold the plate over the small part of the chain .it covers the teeth that the chain is sitting on. and i think thats where the problem is

 

[isael123go]

thank you i appreciate all of the help and i will let you no the end results