Help [Detailed pics]

man, i fear the guys will find the photos to be too blurred .... get more light on the stuff and you get wider focus.....
 
but the clutch problem looks simple.... you got one more cable-bracing move to make, down below

it's easy... i won't spoil it for you
 
The clutch cable has to go through the cable stay under the carb first,and then hook it to the actuator.And the nub you removed from the throtle is supposed to keep the throtle from spinning on the handle bar.It fits in the hole you have to drill.
 
Last edited:
The clutch cable has to go through the cable stay under the carb first,and then hook it to the actuator

-- Thats what i did....
 
Not according to the picture. Its supposed to go from the handle bars,through the cable stay then hook to the actuator Page Title look at the pic of the clutch cable
 
Last edited:
TYVM it works now i just need throttle and i can try to start her up!!!! VROOM! btw i only have 1 support on it..Should i be sturdy?
 
If you mean only one motor mount,no,do not run it with only one motor mount.I doubt you would make it ten feet.
 
no one has fine thread screws that are that size.... dam what should i do...i don't have much money...dam dam dam to bad im not a medal work man to make the rear side strong.. dam dam dam
 
The only thing I know to do is either get a mount from Sick Bike Parts Sick Bike Parts or you can drill and tap the hole for the mounting studs to a 1/4-20 and get some threaded rod and make them any size you need,or make your own mount,there are plenty of ideas on the forum,but you have to do something because it will not work with only one mount,sorry. David look through here for some ideas Mounting Techniques - Bicycle Motor at Motorized Bicycle Forum
 
Last edited:
You must log in or register to reply here.
Back
Top