Winter1979m
New Member
Building the bike and kit tommorow! wish me luck. Bought both from Bikeberry. Will update as project progresses. and tips are welcome. Feel free to e-mail me
Flying Horse 50cc 4stroke
- Thread starter Winter1979m
- Start date
MatCauthon137
Member
Good luck winter, and welcome to the forum. This is probably the funnest little hobby i've picked up in my lifetime. If you need any help, don't be afraid to ask. Everyone here is usually very willing to troubleshoot just about any problem. I've posted several times starting back when I was new at this asking for help with some sort of problem I had. Enjoy your new bike.
Desert Rat
New Member
Welcome and good luck! you'll find lots of great advice here
a tip, you might want to get used to saying 48cc that is except
for here hahaha
don't want a slip of the tongue around officer joe shmoe
a tip, you might want to get used to saying 48cc that is except
for here hahaha
don't want a slip of the tongue around officer joe shmoe
Winter1979m
New Member
question: ist the chain tenisoner/wheelguide, nessary? my chain doesnt have much slack so it seams that adding the cheepo chain wheel tensioner/guide would be pointless
MatCauthon137
Member
Unfortunately, the tensioner is a necessary evil. There are some upgraded ones you can get from SBP or bikeberry or some other places for pretty cheap if you don't like the stock one, which most ppl don't. Here is a thread that may help...
http://motorbicycling.com/showthread.php?t=45512
Desert Rat
New Member
What is not much slack? I don't use one anymore and my chain goes from just
about tight ( bottom portion of chain has about 1/4 to 3/8 of an inch of slack)
and it rides just fine