CVT question

[Russell]

I was given a CVT for x2-x9
What kind of motor can I bolt it up too?

 

[Finfan]

I'm not familiar with the bike. Got any pictures?

 

[Russell]

I have built a few HT's. I was given the Constant Volsity Transmission. I've seen many ref to this CVT here but have no idea what motors it can be hooked to.

Thanks
Russ

 

[Bikeguy Joe]

You'll have to post some measurements and describe it a little, there are a zillion different types and sizes.

 

[Russell]

Thanks Joe,
I found a section dedicated to CVT"S


Russ

 

[Engler]

Thanks Joe,
I found a section dedicated to CVT"S


Russ

Could you post the link please?

 

[azbill]

I think it's at 'the other' place

 

[Russell]

AZ-Bill,
That is correct, just didn't know if it was proper to refer to the other one.


Jim

 

[Technocyclist]

Goped and pocket bike engines bolt to these CVT's... 48cc can have 4HP but not really sure about the torque... can reach to 10,000 RPM...

 

[NEAT TIMES]

I Have A Couple Cvt Builds. To My Info There Is Two Models Of The Small Cvt. They Are Almost Identical. They Have The 78mm Clutch And Bolt Up To Many Motors.they Bolt Up To The Titan 4 Stroke And Most Of The Pocket Bike Motors. They Start Out At Approx 7/1 Ratio And Shift Up. They Work Very Good. The Belts Are Long Lasting. Make Sure You Have Heavy Oil In The Little Gear Box By The Sprocket. I Think My Thread Is "cvt Rack Mount". Ron