Completed bike

SoCalGuy

New Member
"Completed". Never really finished lol.

2024 I made a post about wanting to build a bike and never posted the build.

Anyone on reddit might have seen some build pics but never posted finished pics there either.

Electra tall mens cruiser frame
Chopper forks
A85 w/ cnc top from grubee
Rear rim/36t sprocket from grubee
Generic aluminum gas tank
Front rim from cdh
Custom exhaust
Wide crank
Ebike light kit + 7S battery
Upgraded chain, throttle, tensioner and motor mount.

Modified the stock stand to clear the exhaust

Built a 60w speaker into the saddle bag

Probably more I can't think of.

Edit: ah and pic 2 is from last year when I was playing with an HP carb for fun. pic 1 is current with the stock carb

1000007072.jpg


1000002160.jpg
1000002135.jpg

1000006824.jpg


Runs great with no 4stroking on the stock jet unless the temps are below 80f, so most of the year for me but tops out at only 40mph. If I made some exhaust tweaks and changed the jetting I could probably get more out of it, but with the way no suspension+ chopper forks ride 40 top is good. It likes to cruise at 25 and that's just fine for this build imo.

When I get my tax return I'm planning on doing a faker/A85 build for more speed.
 
Last edited:
Looks really nice. What size rear wheel are you using? I'm assuming a 26" wheel. If so then your engine is turning 7633 rpm to do 40 mph on level ground. Cruising at 25 mph means you generally run at 4771 rpm.
 
Back
Top