Clutch Problem

[GMEOVR]

G'day boys, Got a new skyhawk 66cc motor in today and all was going fine until i had to install the clutch, my problem is i cant pull the clutch in, its fitted like all the photos but i cant even move the clutch arm in with my hands, it can swing out clockwise about 90 deg but it wont move past the cover, hope i make sense, cheers for any help. Ben

Ps i cant move my back wheel either.

 

[Bikeguy Joe]

You can't really push it in...you need to have the cable connected. Once you do that, you will be able to move the back wheel.

 

[GMEOVR]

Cable is connected and working its just doesnt work when the cover is put back on the motor.

 

[Bikeguy Joe]

There is another thread going about this....take the cover off, smack the pin in the center of the sprocket with a hammer, and if that doesn't work, re-assemble it, take the other cover off, and TAP around the outer part of the clutch plate with someone pulling the clutch lever.

 

[GMEOVR]

I cant pull the clutch in at all, it seems to be because of the clutch arm being jammed by the pin, this is only a guess tho.

 

[Venice Motor Bikes]

Do what Joe says!!

 

[GMEOVR]

I have tried both ideas now still cant bring the clutch in.

 

[oylavabeer]

tap harder

 

[GMEOVR]

All fixed it was the clutch arm it was made wrong and i got a new one and it fits fine,