Chinese In Frame Kit

[Bikeguy Joe]

Post your photo entries ONLY here.

Please, just photos, no comments.

This is strictly for posting the photos and a bit about the bikes.

If you wish to post a photo of the same bike in the photo area and comment, you are cleared for takeoff, but please let's keep this just for photos.

 

[saetta]

26" Pacific brand single speed cruiser.

 

[wickedsickbike]

Re: Chinese In Frame Kit "motive"

80cc "kings motor bikes" kit. has ngk plug,motorcycle copper plug wire,and a 90degree auto boot. a drilled out stock muffler, a "ufo" air filter.all connected to a"kings sales and service" 36tooth race sprocket on alloy mag wheel.top speed 34.5mph

 

[hill climber]

power king shop "80". i built the frame. single speed with a jack shaft

 

[hilifestile]

80cc raw on cruiser bike from American flyer company.

 

[BrettMavriK]

Winter Build-Off / Chinese In Frame Kit

Orange Coast Chopper

Top Speed: 44mph

-69cc Motor
-Built In Jack Shaft
-5 Speed Derailer With Grip Shifter
-Billet Clutch Actuator Upgrade (Creative Engineering )
-Expansion Chamber Exhaust
-Custom Tank, Filler Neck Seal, Petcock & Filter
-Custom Disc Brakes With Promax Calipers
-"Split" Dual Pull Brake Lever
-Rear Reverse Cantilever Coilover Shock With Custom Flame Brackets
-Custom Low Profile "Duck Bill" Seat & Post

Coming Soon
-Custom Self Contained Nimh Battery Electrical System
with 3 watt Super LED Headlight, LED Brake & Tail Lights, And Turn Signals
-Custom Springer Front End

 

[Retmachinist]

This was originally a 35 year old Huffy 10 speed Mt. Bike I picked up for $20. All parts you see were machined from 6061 Aluminum in my shop. I will put pics. and build details on the pictures and videos part of the forum.

John

 

[x-soldat]

Starting to get a feel for the sight layout and figured I would post this in the appropriate thread...Here are a few pics of my baby...Scott
Frame
MIFA 7 speed cruiser (German Made)
dual cantilever brakes
26" alloy rims from "Down hill"
Schwalbe tires 26x2.0"
Motor kit
66cc Grubee GT-5 8 (plug/wire upgrade NGK)
Goodies
Chrome Ax Mirrors
bent seat post
Brooks B190 saddle
Sigma speedo
alloy Pedals
Center Stand

 

[stults customs]

dyno gt deuce with 66cc kit

 

[brisbane_boy]

Mr Davidson.
67cc HT

 

[Spunout]

The message you have entered is too short. Please lengthen your message to at least 10 characters.

 

[drhofferber]

Here is my entry for the winter build off...this is my second build and I learned alot...Thank you everyone for all the hard work you have done...Dennis...Gary Fisher aluminum...tight fit...50 slant...wht wire head light and a rear brake light that works(nashbar)...

 

[TigerToothBikes.com]

The message you have entered is too short. Please lengthen your message to at least 10 characters.

 

[Bikeguy Joe]

Post your photo entries ONLY here.

Please, just photos, no comments.

This is strictly for posting the photos and a bit about the bikes.

PLEASE post thumbnails ONLY.

If you wish to post a photo of the same bike in the photo area and comment, you are cleared for takeoff, but please let's keep this just for photos.

 

[jeff walter]

Schwinn cruiser-4 inch stretch..

 

[fenderhole]

Greenline Stretch Cruiser with PK80

 

[Retmachinist]

This bike started as a 25 year old Sears Free Spirit Cruiser. I will post more pics. and build details in the pictures and videos forum.

John

 

[mike]

two i built this winter

 

[Earthman]

24" Huffy frame ($25 from Craigs List). My 1st MB.

 

[drhofferber]

No.2...1995 GT Arette...80cc...nothing fancy, just fun...