Chain alignment, ruining drive sprocket

Discussion in 'Hubs, Gearboxes, Sprockets and Chains' started by Levimoody, Sep 27, 2019.

  1. Levimoody

    Levimoody New Member

    Joined:
    Sep 24, 2019
    Messages:
    7
    Likes Received:
    0
    okay so my issue is that I'm using the disc brake holder to mount my rear sprocket, this pushes it further out from the rim and front sprocket, about an inch and a half. I took the clutch cover off and noticed that it has been grinding away ever since I put on a smaller rear sprocket. So I either need to figure it out push the drive sprocket further away from the bike or possibly get a new rear tire so that I can mount the sprocket closer to New York. Any feedback is greatly appreciated.
     
  2. indian22

    indian22 Well-Known Member

    Joined:
    Dec 31, 2014
    Messages:
    3,196
    Likes Received:
    2,735
    Please show closeup photos of problem areas.

    Rick C.
     

Share This Page