Blow By U First Production Build Felt Twin

Discussion in 'Motorized Cruiser Bicycles' started by Terry Blow, May 7, 2010.

  1. Terry Blow

    Terry Blow Dealer & Custom Builder

    Joined:
    Oct 29, 2009
    Messages:
    1,117
    Likes Received:
    0
    OK here we go Blow By U First Production Build Felt Twin here are some pre build videos and pictures

    YouTube - Felt Twin Pre production build video Blow By U Motorized Bicycles .ca

    FeltTWIN_GRN1.jpg

    SANY0331.jpg This super cute model is my 2 year old daughter Vanessa

    SANY0335.jpg

    SANY0340.jpg

    This bike will be sporting a sturmer front drum brake, HD Axle Kit with 56 tooth rear sprocket and I will be doing a top tube fuel tank this bike will be clean quite and climb hills like a billy goat Ha Ha Ha in fact that is going to be this Bikes Name BILLY GOAT GREEN
     
  2. PutsTheDUIinRUINED

    PutsTheDUIinRUINED New Member

    Joined:
    Oct 17, 2009
    Messages:
    80
    Likes Received:
    0
    Me likey in-tube Felt builds...the Twin is a good choice too because it can pull off the four-stroke engine look pretty well. Are you going to use a two-stroke or a four-stroke?
     
  3. Terry Blow

    Terry Blow Dealer & Custom Builder

    Joined:
    Oct 29, 2009
    Messages:
    1,117
    Likes Received:
    0
    Oh man I forgot to put that in there in the description LOL silly me Yes Yes this build will be sporting a 5: ratio 4G T Belt Drive Engine Kit with the HuaSheng 142F-cc 49cc 4 stroke. And a HD axle kit with a free wheel and whom ever ends up with this beauty can change out the 11 tooth free wheel for the 10 tooth non free wheel for more reliability with the much larger HD axle free wheel. Heres a couple pics

    4G T Belt Drive Engine Kit.jpg

    freewheelsprocket-hdaxle-wbrake.jpg
     
    #3 Terry Blow, May 7, 2010
    Last edited: May 20, 2010
  4. Terry Blow

    Terry Blow Dealer & Custom Builder

    Joined:
    Oct 29, 2009
    Messages:
    1,117
    Likes Received:
    0
    I FORGOT ONE VERY IMPORTANT THING THE SALE OF THIS BIKE WILL NOT BE DISCUSSED IN THIS THREAD YOU CAN PM ME OR WAIT UNTIL IT COMES TO THE SWAP PAGES THIS IS A BUILD THREAD ONLY

    Thank you
    Terry
     
  5. Terry Blow

    Terry Blow Dealer & Custom Builder

    Joined:
    Oct 29, 2009
    Messages:
    1,117
    Likes Received:
    0
    This build will in some ways be similar to my Felt MP build but will stop short of all the high tec fancy stuff here are a few pics of the MP

    Picture 035.jpg

    SANY0272.jpg

    These pics of the MP are just samples of what I will be doing to the BILLY GOAT GREEN like the engine cover will get a nice matching color
     
  6. Terry Blow

    Terry Blow Dealer & Custom Builder

    Joined:
    Oct 29, 2009
    Messages:
    1,117
    Likes Received:
    0
    Plus BILLY GOAT GREEN will only be sporting the very tidy stock exhaust here are some pics of the stock exhaust

    4g-engine-view-spread-small[1].jpg

    gas line.02.jpg

    4g-belt-bike.jpg This picture is a borrowed picture from another great builder But I will never if at all possible use a chain idler the 4G kits have no need for them if installed correctly This picture is to show what the stock exhaust on a 4G looks like.

    SANY0329.jpg Here is another example from a build I did today May 6 /2010

    Terry
     
    #6 Terry Blow, May 7, 2010
    Last edited: May 7, 2010
  7. Terry Blow

    Terry Blow Dealer & Custom Builder

    Joined:
    Oct 29, 2009
    Messages:
    1,117
    Likes Received:
    0
    BILLY GOAT GREEN is the first production bike from Blow By U but this type of bike is what we are all about QUALITY AND STYLE SECOND TO NONE

    Cheers
     
    #7 Terry Blow, May 7, 2010
    Last edited: May 7, 2010
  8. Terry Blow

    Terry Blow Dealer & Custom Builder

    Joined:
    Oct 29, 2009
    Messages:
    1,117
    Likes Received:
    0
  9. Terry Blow

    Terry Blow Dealer & Custom Builder

    Joined:
    Oct 29, 2009
    Messages:
    1,117
    Likes Received:
    0
  10. 2dawgs

    2dawgs New Member

    Joined:
    Feb 15, 2010
    Messages:
    209
    Likes Received:
    0
    Terry,

    Can't wait to see this baby when she is done. As usual great craftsmanship and design. Your assistant Vanessa seem to be doing all the work (LOL).

    Cheers,

    Steve
     
  11. Terry Blow

    Terry Blow Dealer & Custom Builder

    Joined:
    Oct 29, 2009
    Messages:
    1,117
    Likes Received:
    0
  12. Terry Blow

    Terry Blow Dealer & Custom Builder

    Joined:
    Oct 29, 2009
    Messages:
    1,117
    Likes Received:
    0
    LOL yes she is amazing but of course this time it took 3 takes to do that one video she decided that I should not be talking so loud in one of them and was yelling at me to stop LOL so Take 3 LOL
     
  13. Terry Blow

    Terry Blow Dealer & Custom Builder

    Joined:
    Oct 29, 2009
    Messages:
    1,117
    Likes Received:
    0
    #13 Terry Blow, May 16, 2010
    Last edited: May 17, 2010
  14. corgi1

    corgi1 New Member

    Joined:
    Aug 13, 2009
    Messages:
    2,282
    Likes Received:
    1
    I really like the vidios
     
  15. Terry Blow

    Terry Blow Dealer & Custom Builder

    Joined:
    Oct 29, 2009
    Messages:
    1,117
    Likes Received:
    0
    #15 Terry Blow, May 17, 2010
    Last edited: May 17, 2010
  16. Terry Blow

    Terry Blow Dealer & Custom Builder

    Joined:
    Oct 29, 2009
    Messages:
    1,117
    Likes Received:
    0
    Here is the video tapping the top tube for filler neck.

    This is the original drilling and tapping it was over 15 Min's long I have cut it down and here it is the actual work that was done.
    YouTube - Felt Twin Drill & Tap Top Tube Edited

    This video is the first video posted and was take #2 and there was no drilling or tapping done but it explains what was done much of what was in the original was cut out so with the two together it fully explains and demonstrates the process
    YouTube - Felt Twin Top Tube Fuel Tank
     
    #16 Terry Blow, May 17, 2010
    Last edited: May 19, 2010
  17. Terry Blow

    Terry Blow Dealer & Custom Builder

    Joined:
    Oct 29, 2009
    Messages:
    1,117
    Likes Received:
    0
    #17 Terry Blow, May 17, 2010
    Last edited: May 19, 2010
  18. Terry Blow

    Terry Blow Dealer & Custom Builder

    Joined:
    Oct 29, 2009
    Messages:
    1,117
    Likes Received:
    0
  19. Terry Blow

    Terry Blow Dealer & Custom Builder

    Joined:
    Oct 29, 2009
    Messages:
    1,117
    Likes Received:
    0
    I hope you all like the videos they are not pro but they are instructional. I will post more videos next week end.
    Cheers
    Terry
     
  20. Terry Blow

    Terry Blow Dealer & Custom Builder

    Joined:
    Oct 29, 2009
    Messages:
    1,117
    Likes Received:
    0
    Well I just could not stay away from the bike and making videos. I did say I would add some more on the weekend. But here I am with the next step this section is long and because of the bolts I am using they are too long they where giving me a hard time. I have done the videos in three parts and then the installing of the front fender and the the front wheel with drum brake. Here is part #1

    YouTube - Felt Twin Front Fender Safety Up Grade
     
    #20 Terry Blow, May 18, 2010
    Last edited: May 18, 2010

Share This Page