J jrok96 New Member Oct 11, 2018 13 1 3 46 Nov 2, 2018 #1 Stripped 66cc down to the cases and have ordered some bearings and wondering if there are any certain seals that have been found to last longer/ perform better than the chineese stock ones ? If so does anyone have a link to them . Thanks ! Last edited: Nov 2, 2018
Stripped 66cc down to the cases and have ordered some bearings and wondering if there are any certain seals that have been found to last longer/ perform better than the chineese stock ones ? If so does anyone have a link to them . Thanks !
crassius Well-Known Member Sep 30, 2012 4,032 158 63 USA Nov 2, 2018 #2 not had any problems with seals that come with kits Reactions: jrok96
J jrok96 New Member Oct 11, 2018 13 1 3 46 Nov 2, 2018 #3 Thanks . Figured I would check with u guys first before re-using the originals .
crassius Well-Known Member Sep 30, 2012 4,032 158 63 USA Nov 2, 2018 #4 should be OK if not damaged coming out or going back in - look at them carefully
crassius Well-Known Member Sep 30, 2012 4,032 158 63 USA Nov 3, 2018 #5 strange - just a couple hours after that post, guy comes in with funny noise in motor - open clutch cover and soaked with fuel need to get that open today and also check if mains have failed
strange - just a couple hours after that post, guy comes in with funny noise in motor - open clutch cover and soaked with fuel need to get that open today and also check if mains have failed
crassius Well-Known Member Sep 30, 2012 4,032 158 63 USA Nov 3, 2018 #6 seals didn't go bad, just poked chunks of failed bearings thru them
