top of fender to fork brace. No it isnt lopesided. My wheel has a caliper and disc up front so the tire is offset to the right a little.

top of fender to fork brace. No it isnt lopesided. My wheel has a caliper and disc up front so the tire is offset to the right a little.

  • 0
  • 0
another full pic of how the fender stay is fashioned and mounted

another full pic of how the fender stay is fashioned and mounted

  • 0
  • 0
10 Guage round wire stock fender stays that are wire tied to the fork and held at the bottom with washers.

10 Guage round wire stock fender stays that are wire tied to the fork and held at the bottom with washers.

  • 0
  • 0
Didnt like the bracket that came with the mirror and left the mirror too inbound. I used a conduit clamp here that usually attaches to electrical stru

Didnt like the bracket that came with the mirror and left the mirror too inbound. I used a conduit clamp here that usually attaches to electrical stru

  • 0
  • 0
My cooler rack pan that allows my cooler (aka trunk aka water proof carryall) to my rack platform. Does move around and only takes one bungy to hold

My cooler rack pan that allows my cooler (aka trunk aka water proof carryall) to my rack platform. Does move around and only takes one bungy to hold

  • 0
  • 0
Detail of how I adapted the stock throttle lever to work with the brake cable off the schwinn. I hack sawed all of the other bits off the throttle lev

Detail of how I adapted the stock throttle lever to work with the brake cable off the schwinn. I hack sawed all of the other bits off the throttle lev

  • 0
  • 0
Scavenged Adjuster and Brake cable outer casing from the Schwinn.

Scavenged Adjuster and Brake cable outer casing from the Schwinn.

  • 0
  • 0
Scavenged throttle shifter from a 79 schwinn i picked up for 5 bucks and saved it from the scrap heap. Modified by drilling out the ratchet lever so i

Scavenged throttle shifter from a 79 schwinn i picked up for 5 bucks and saved it from the scrap heap. Modified by drilling out the ratchet lever so i

  • 0
  • 0
Showing the Kill switch mounting and position. I used the throttle housing from the weed wacker to mount it under my seat post. soon itll house anther

Showing the Kill switch mounting and position. I used the throttle housing from the weed wacker to mount it under my seat post. soon itll house anther

  • 0
  • 0
Mounting of the struts to the rear axle

Mounting of the struts to the rear axle

  • 0
  • 0
front of fender

front of fender

  • 0
  • 0
rear of fender

rear of fender

  • 0
  • 0
fender from side albeit upside down.. (:<

fender from side albeit upside down.. (:<

  • 0
  • 0
New Pvc fender moulded, Fit to tire and mounted :)

New Pvc fender moulded, Fit to tire and mounted :)

  • 0
  • 0
first attempt at a fender that I hammered out of aluminum.

first attempt at a fender that I hammered out of aluminum.

  • 0
  • 0
Pvc Pipe I cut for the fender being heated to be moulded to the front tire.

Pvc Pipe I cut for the fender being heated to be moulded to the front tire.

  • 0
  • 0
bishop letov

Newest mods to the black beauty

There are no comments to display.

Album information

Album owner
bishop letov
Date created
Item count
16
View count
497
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

bishop letov

bishop letov

Media items
0
Albums
0
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Top Bottom