What is the best technique to lock down the Sprocket Clamp Assembly

[Motorbikenewb]

Greetings,

Regarding the Sprocket Clamp Assembly, the nuts tend to loosen up a bit, even with the proper use of locking washers. My question is this: What's the best way to secure the nuts so that they don't keep coming loose?

I imagine you can use locktite, or double nut each bolt. What's the best solution, and why?

Hope to hear from you soon.

 

[maniac57]

Replace the cheese hardened junk hardware with good grade 5 bolts (grade 8 works too)
Double nut or locktite (BLUE!)if required.
None of mine ever had any issues coming loose after the first couple weeks.
I have found most of the hardware on these kits will just keep stretching and loosening until you replace the junk kit hardware with better grade stuff.
Then once everything takes a set, it will stay tight.