Smaller 2 stroke engine drive sprocket?

[jmden]

Have the standard chinese 10 tooth that came with kit. Am looking for 8 or 9 tooth (if the exist) as I want lower speed for steeper hills and bumpy backroads hauling a trailer. Haven't found much yet looking around. Thanks.

 

[crassius]

doubt you'll find one - go to 44T or 48T or 56T in back

 

[jmden]

Have a 54 tooth back there already. Want to motor slow towing trailer.

 

[crassius]

jackshaft kit, custom sprocket, 4-stroke motor, maybe belt drive like whizzer???

 

[jmden]

Yeah, had planned on doing a jackshaft kit, but then got talked out of it, or at least convinced to give the typical install a try first. Too fast for what I need. Reccomendations on a kit to best fit the standard 66cc 2-stroke?

 

[MotorBicycleRacing]

The only jackshaft kits worth buying are from www.sickbikeparts.com
Do not buy a chinese knock off kit.

Yeah, had planned on doing a jackshaft kit, but then got talked out of it, or at least convinced to give the typical install a try first. Too fast for what I need. Reccomendations on a kit to best fit the standard 66cc 2-stroke?

 

[jmden]

That was my plan all along. Probably get their 9 tooth jackshaft gear and then small front chainring (24 tooth I think) and see if I can fit their Shimano megadrive (with that super low gear) on my rear. Hopefully all that low gearing will get me at a good RPM range doing 3-8 mph towing a heavy trailer on old 4WD roads, some parts fairly steep. Any thoughts here would be appreciated. Thanks for your advice so far guys.

 

[curtisfox]

WOW! Better build a good heavy wheel, 11 gage spokes. And fat tires...................Curt