deacon
minor bike philosopher
I'm waiting for another 7ah battery to turn my 24v pack into a 36v pack, so today I rode the 24v pack /350 rhino bike around the hood for maybe the last time. I plan to use that bike to run me over to the park for my morning walks, which I will be doing now that I'm not building all day everyday.
So what did I find out? The 350 watt 24v is an excellent helper motor. I pedaled the bike very little and it was very slow on the hills. I like slow to be honest. I got a chance to look around and satisfy my noisy bend. It did get slow enough about twice in a mile so that I could pedal a few yards.
After I came back from the warm up ride, I jumped on the 500 watt 36v bike which makes it actually 750 watts. Since I wasn't planning to stop, I ran it over the route to the walking path.
First of all I couldn't let the throttle all the way out anywhere much. The roads are just awful around the hood these days. I guess it is the budget thing. All that stimulus money didn't make it down to the hood. One thing I did notice there is absolutely no pedaling required or even possible for the most part with the big bike. It is still best to start off pedaling but only because the bike will toss you around if you start under power.
All in all I expect the 350 with 36v to be the bike I ride most. I raised the seat and let a little air out of the tire to get it just a smidgen lower. The seat was rubbing. It ran better of course with the drag gone.
The big bike has more drag. I think the chain is too tight. Or the tension on the tire is to much. Since I welded it in place, I will try letting some air out of the tire to lower the tension. Still it is faster than I really like, but it has that great hill climbing ability.
If I had a carport or some other kind of shelter I would probably ride the bikes more. Having to attach the trailer is a pain. Getting them in and out of the shop is easier since I hung the new door to swing out instead of in, but still not perfect.
So what did I find out? The 350 watt 24v is an excellent helper motor. I pedaled the bike very little and it was very slow on the hills. I like slow to be honest. I got a chance to look around and satisfy my noisy bend. It did get slow enough about twice in a mile so that I could pedal a few yards.
After I came back from the warm up ride, I jumped on the 500 watt 36v bike which makes it actually 750 watts. Since I wasn't planning to stop, I ran it over the route to the walking path.
First of all I couldn't let the throttle all the way out anywhere much. The roads are just awful around the hood these days. I guess it is the budget thing. All that stimulus money didn't make it down to the hood. One thing I did notice there is absolutely no pedaling required or even possible for the most part with the big bike. It is still best to start off pedaling but only because the bike will toss you around if you start under power.
All in all I expect the 350 with 36v to be the bike I ride most. I raised the seat and let a little air out of the tire to get it just a smidgen lower. The seat was rubbing. It ran better of course with the drag gone.
The big bike has more drag. I think the chain is too tight. Or the tension on the tire is to much. Since I welded it in place, I will try letting some air out of the tire to lower the tension. Still it is faster than I really like, but it has that great hill climbing ability.
If I had a carport or some other kind of shelter I would probably ride the bikes more. Having to attach the trailer is a pain. Getting them in and out of the shop is easier since I hung the new door to swing out instead of in, but still not perfect.
Last edited: