gx 120

[highstrung74]

just bought a honda gx 120 for a fair price and want to put this on a bicycle...any one can link the trans(cvt) and mounting kit for this application....thanks in advance
Dallas Dean

 

[Davezilla]

Look up the Comet Torque converter, they make CVT's for most brands of small engines and are pretty reliable... Northerntool.com should have them in their small engine and go kart parts link

 

[Dan]

I don't personally know of a kit but bet there is one out there, HS.

I have a Comet CVT and the final drive/chain sprocket is between the backing plate and the driven gear. (wrong side of the transmission/gear reduction) So would have to be jackshafted over to run a chain to the rear wheel.

Think your most likely to be in DIY land with that sort of set up and engine. But good news is many really talented people have done it and you can see and find lots of workarounds.

 

[FFV8]

I have a GX120 clone in my sidehack. There are no off-the-shelf kits or parts to simply bolt one in a bicycle.

I used a Comet 20 series driver on the engine, and a jackshaft running on the shaft in the bottom bracket:

It has been a reliable drive. The belt smooths things out.

.