frame too small for 4 stroke. smaller crank sprocket?

[Spunout]

i thought a pacific capeland would make a nice bike four my 4 stroke, but after installing the mounting plate as low as i could (1/4" just above crank sprocket) theres nooo way its going in.
i didnt count the teeth on crank sprocket, but i think its a 44tooth. i'm thinking the only way to do this without frame mods is to use a smaller crank sprocket. how small do they go? 25 tooth or so? should make a big diff in size. i need to lower the mounting plate at least another 2"
ideas?

 

[azbill]

I am using a 36 on the stretch,,,they are really cheap... like 10$

you might wanna pic up a kiddie bike from goodwill or something, then you can use the shorter crank arms as well

 

[RedB66]

I've used a 25T before. They are very small and fairly common. If you search for a BMX sprocket you should be able to find one. The one pictured is a 25.

 

[corgi1]

wow,that Barrons is sweet

 

[azbill]

Barron is RedB66's name

 

[corgi1]

Well,?...He has a nice MB then.

 

[Spunout]

I've used a 25T before. They are very small and fairly common. If you search for a BMX sprocket you should be able to find one. The one pictured is a 25.

thanks! thats just about the diameter i'm thinking.

yes, nice bike btw

 

[glacknoid]

Nachooooooooooooooooooooooooo Libre

 

[jcchappy]

some mountain bikes gave a removable front gear that can be used. thats what I use on my builds. It lets the engine sit lower and is lots easier to crank.

 

[bairdco]

a 36 will give you about an inch more clearance than a 44. a 25's pretty extreme, but whatevs, sometimes ya gotta do what ya gotta do to make it fit.

 

[michaelgrav]

Barrons is sweet, But you guys need to bury the dual long chain bikes.. Only adds to headaches!