Hey everyone, I'm doing my first build and I'm using an OCC Stingray, I've managed to get everything assembled and what not and when it came time to start......... no dice. I've got a CNS carb and it's going to be the death of me. I adjusted the float so the carb doesn't flood when i turn the petcock on, but it seems that the gas will go into the carb, but no mixture goes into the compression chamber. HELP ME PLEASE!!!!!!!!!!!!!!!!!!!!!!!!
First build and need help!!!!!
- Thread starter Garrett66
- Start date
I would invest 12-13 bucks and get the nt carb or even the speed carb
http://www.ebay.com/itm/Carburetor-...949?pt=LH_DefaultDomain_0&hash=item415f3d8e8d
Or the speed carb
http://www.ebay.com/itm/Carburetor-...949?pt=LH_DefaultDomain_0&hash=item415f3d8e8d
People say the speed carb is better
Some people like the cns carb but it takes alot of patience and time.
http://www.ebay.com/itm/Carburetor-...949?pt=LH_DefaultDomain_0&hash=item415f3d8e8d
Or the speed carb
http://www.ebay.com/itm/Carburetor-...949?pt=LH_DefaultDomain_0&hash=item415f3d8e8d
People say the speed carb is better
Some people like the cns carb but it takes alot of patience and time.
Last edited:
The cns is prone to being very sensitive and is a bad choice for inexperienced builders. My suggestion is to spend a $20 and get the nt or speed carbs listed above. I've been messing with two strokes for a long time and the cns gave me nothing but hassles the one time I tried to use one.. I will not use one again. The nt is simple and works well. Just my opinion.
I have a used nt and speed carb for sale. I'lll make you a deal on one of the carbs plus a cool ass billet aluminum intake.