broken moter mount

How far is the stud inside the threads? Probably be better to get a replacement motor through one of the vendors here or on Ebay for about $60 bucks rather than rebuilding.
 
Thanks evey one i decided to pulll one of my studes out of my old engine and putit in there as much as i couled . someone told me that it could be fixed useing some type of weld in town so i'll take it up there and see what thay can do for me . i took it for a ride to day and it held up . but i probly wont take it till i get it fixed .. what is a helicoil ?
the stude is still holding in there tight.
 
andrewg225 said:
Thanks evey one i decided to pulll one of my studes out of my old engine and putit in there as much as i couled . someone told me that it could be fixed useing some type of weld in town so i'll take it up there and see what thay can do for me . i took it for a ride to day and it held up . but i probly wont take it till i get it fixed .. what is a helicoil ?
the stude is still holding in there tight.
Click to expand...

Yes take your motor to someone who knows how to weld aluminum this way you can be sure for a safe ride.If they can't do anything,I would suggest a new motor or kit.You defiantly wouldn't want to take any chances of the stud breaking all the way threw while traveling down the road at 20+ mph from the motors force.
 
Here's a tip when you remount the engine. Make sure that the frame tubes of the bike are flush with the inside of the engine side of the mount. NO GAPS! I was running into this same problem, I broke 2 sets of studs like that... I was lucky the motor mount itself didn't break. Since then, I remounted and made sure that the bike frame was snug against the inside of the mount, and i've been running strong even off road, and no signs of mount or stud stress.
 
You must log in or register to reply here.
Back
Top