Brass inline fuel shut-off

[knightscape]

I'm looking for a brass inline fuel shut off with barbs for 1/4" fuel line. Anyone point me a decent one? I'm using a plastic one right now but i just don't like it, it's tight to turn and just looks cheap on the bike. Either straight or 90° would be cool. The only one's I've found are a bit over sized and clunky looking for the size hose. Thanks!

 

[knightscape]

Well I've been looking around a bunch and I found one that came close but is for 3/16 line and I need to use 1/4" line out of my banjo fitting on the tank:
http://www.amazon.com/Motion-Pro-08...R5YU/ref=sr_1_3?ie=UTF8&qid=1433167177&sr=8-3


Then I found two from the same manufacturer:
http://www.amazon.com/Oregon-07-403...&qid=1433167506&sr=8-1&keywords=Oregon+07-403

and I finally went with:
http://www.amazon.com/gp/product/B000WMHGIA

Neither are brass, but they do look pretty solid and I like the panel mount on the 90 degree valve. I'll have to see if I can put together a little panel to attach it to and make it nice and solid, that would be cool.

 

[woogie_man]

You can always had up the line before install and shove it on the barb. Of course with no fuel in the line. Should make it just soft enough to go over the barb and then will set to the size of the fitting.