I found an old spst switch that a buddy had given me. At the time, I didnt know it was an spst switch, and was using it as a killswitch, one wire to cdi and the other to ground. Pretty sure its what killed my cdi before I built my 98cc cruiser, but who cares. Anyway, I just wired it up and hose clamped it to my handlebars for the time being. I can reach it with my thumb. Over the weekend or some time next week, I'll work on retrofitting the switch into the hole where I had my previous toggle switch mounted, where the horn button used to be on my brake lever. I will most likely need to do some cutting with a dremel and possibly drill a bigger hole as well, but I think I can get the switch in there. I may also have to make the wires longer going to the switch, but that's not a big deal. Pretty sure I can get it in there. It's a much better switch than the one I had previously. The one I had is not meant for automotive use, maybe more for a project board or something. The one I just installed is meant for automotive, most likely for controlling spot lights or fog lights, as its got multiple connections. Either way, its a pretty sweet little deal and once I get it mounted how I want, it wont look much different than the one that was in there to begin with.