Outlaw
You Are Correct, My Bad. He Wanted An Easy, And I Did Not Think It Thru.
I Have All The Parts For The Separate Jack Shaft Using The Ideal "staton.com" Parts. It Is Economical To Build And Eliminates The Need For The Freewheel On The Pedals.
I Looked At The Staton 3 Groove Freewheel Adapter And The $5. 3 Prong Sprocket Several Time`s, Before I Under Stood Their Function, Very Slick Parts.
With The Staton Parts You Can Pedal Start Your China Girl And Have A Freewheel For The Pedals And The Rear Wheel Freewheels. The titan 4 stroke will need a gear box to achive propper final gear ratio.
Addicted - Yes You Could Use The Single Speed Freewheel That Comes Stock On The Occ Choppers.
A Member Recently Posted A Link To A Aluminum Jackshaft Bracket With Bearings @ $29. . Comes With 1/2" Id Brgs, But They List Another Bracket That Has 5/8" Id Brgs, Which I Think The Bearings Could Switch. The Parts Are At A Robot Supply.
A Steel Plate Could Be Welded On The Frame And Bolt The Alum Bracket To The Plate. Will Try Find The Link.
Some pic`s of my plan. trying to keep the price dn as i have a room full of occ choppers. lol, addicted !!! I found the large gold iradacated washer`s for bearing mount`s = 10 washer`s for $10..
Will use a short piece of 2 1/2" channel iron with gold washer welded to each end for my brackets. This will work on my stretch cruiser`s also.
Hope this helps and redeems me!! ron