GoldenMotor.com
The springer front end is designed like the old Harley Springers. It works very well to smooth out bumps and it's a blast to watch the action as you
The stock chrome OCC fender is stabilized with HD chrome braces bent to fit the Stiletto's stock fender mounts. The tail light is mounted to the fend
Giant Stilettos come with pretty good stock components including a Shimano caliper and disc for the rear brake that works very well. I have considere
Here you can see the rubber retainer that holds the gas tank on. The low restriction air cleaner was purchased from Sick Bike Parts and modified to fi
The springer front end is designed like the old Harley Springers. It works very well to smooth out bumps and it's a blast to watch the action as you
The Stiletto jackshaft makes it possible to alter gear ratios and allows the use of right side drive components. I fabricated the left hand sprocket
This is the view from the driver's seat. The vintage Harley mirrors are perfect for the setup and the Whizzer speedo red lines over 35MPH. The Harley
This is the view most of you will see if I get into racing! It shows the 4.25" OCC tire, the wider overall stance and the low center of gravity. The r
S

The springer front end is designed like the old Harley Springers. It works very well to smooth out bumps and it's a blast to watch the action as you

There are no comments to display.

Media information

Album
Stiletto Bobber
Added by
Scootmeister
Date added
View count
596
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Top Bottom