GoldenMotor.com
Right rear angle.
The middle bar is a larger diameter. These are 1 1/4" brackets. There is a wrap of rubber as a spacer between each bracket and the bar.
The front and back bars of the trailer are smaller in diameter, and set at a slightly different hieght to the middle bar. There is a 1/4" plywood shi
The connector clamped on to my bike. I had to go farther ahead to clear the 36T and chain, putting the trail really close to the back wheel.
Right rear angle.
The deck is 3/4" plywood, triple-coated and sealed. It's held on with conduit clamps and #8 screws.
Back of the trailer, with a bit of reflective tape and some lights (not wired) up on the top rails.
Here's the connector for the trailer.
CTripps

Right rear angle.

There are no comments to display.

Media information

Album
Trailer
Added by
CTripps
Date added
View count
411
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Top Bottom