GoldenMotor.com
Loaded with groceries.

Loaded with groceries.

  • 0
  • 0
Loaded with groceries.

Loaded with groceries.

  • 0
  • 0
The deck holds 2 'Rubbermaid' totes nicely.

The deck holds 2 'Rubbermaid' totes nicely.

  • 0
  • 0
This is my MAB with the trailer on. There is enough clearance to work with, but the trailer arm blocks access to my axle-mounted kickstand.

This is my MAB with the trailer on. There is enough clearance to work with, but the trailer arm blocks access to my axle-mounted kickstand.

  • 0
  • 0
The middle bar is a larger diameter. These are 1 1/4" brackets. There is a wrap of rubber as a spacer between each bracket and the bar.

The middle bar is a larger diameter. These are 1 1/4" brackets. There is a wrap of rubber as a spacer between each bracket and the bar.

  • 0
  • 0
The front and back bars of the trailer are smaller in diameter, and set at a slightly different hieght to the middle bar. There is a 1/4" plywood shi

The front and back bars of the trailer are smaller in diameter, and set at a slightly different hieght to the middle bar. There is a 1/4" plywood shi

  • 0
  • 0
The connector clamped on to my bike. I had to go farther ahead to clear the 36T and chain, putting the trail really close to the back wheel.

The connector clamped on to my bike. I had to go farther ahead to clear the 36T and chain, putting the trail really close to the back wheel.

  • 0
  • 0
Right rear angle.

Right rear angle.

  • 0
  • 0
The deck is 3/4" plywood, triple-coated and sealed. It's held on with conduit clamps and #8 screws.

The deck is 3/4" plywood, triple-coated and sealed. It's held on with conduit clamps and #8 screws.

  • 0
  • 0
Back of the trailer, with a bit of reflective tape and some lights (not wired) up on the top rails.

Back of the trailer, with a bit of reflective tape and some lights (not wired) up on the top rails.

  • 0
  • 0
Here's the connector for the trailer.

Here's the connector for the trailer.

  • 0
  • 0
Added some reflective tape along the trailer arm.

Added some reflective tape along the trailer arm.

  • 0
  • 0
Vis-vest spread across the back of the trailer. Eventually I'll probably put together a battery box and switch for the lights on the upper rails.

Vis-vest spread across the back of the trailer. Eventually I'll probably put together a battery box and switch for the lights on the upper rails.

  • 0
  • 0
The connector for the trailer bothers me a litte, there's less than 1/16" clearance fom the clamp to the drive sprocket.

The connector for the trailer bothers me a litte, there's less than 1/16" clearance fom the clamp to the drive sprocket.

  • 0
  • 0
The trailer behind my wife's MAB.

The trailer behind my wife's MAB.

  • 0
  • 0
The trailer, left side.

The trailer, left side.

  • 0
  • 0
The trailer behind by wife's MAB. It has a 48T sprocket, and pulls the trailer without a strain.

The trailer behind by wife's MAB. It has a 48T sprocket, and pulls the trailer without a strain.

  • 0
  • 0
An old vis-vest spread across the back.

An old vis-vest spread across the back.

  • 0
  • 0
Our little cargo trailer.

Our little cargo trailer.

  • 0
  • 0
CTripps

Trailer

A little trailer we converted from kid-carrier to grocery hauler.
Click to expand...
There are no comments to display.

Album information

Album owner
CTripps
Date created
Item count
19
View count
979
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

CTripps

CTripps

Media items
0
Albums
0
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Top Bottom