Two weeks ago I put a Dax 80 kit on my Diamondback. It runs great and I've gone through 3 tanks at 20:1 so I'm thinking break in should be almost complete. The problem is that off the line it has no torque. A friend of mine has an 80cc that has been ported and some head work, same sprocket, and it has tons more torque off the line.
Tonight I put on a slant head, CNS carb, SBP expansion tube and it still has to be moving 5mph or so before it will keep running.
Is the porting the thing I'm missing?
edit:
I seem to have put this in the wrong forum, can someone move it to the performance section?
By Norman....
to the performance section it will go wait it is in the performance section?!!
Tonight I put on a slant head, CNS carb, SBP expansion tube and it still has to be moving 5mph or so before it will keep running.
Is the porting the thing I'm missing?
edit:
I seem to have put this in the wrong forum, can someone move it to the performance section?
By Norman....
to the performance section it will go wait it is in the performance section?!!
Last edited by a moderator: