Converting centrifugal clutch back to manual.

[TigerToothBikes.com]

Would like to convert a centrifugal back to manual but i've had the clutch cover off and im already stumped! whats the best way to remove the nut as it of course spins! Don't wanna destroy it as per normal so would like the blessing of the elders before proceeding!

 

[TigerToothBikes.com]

Being the impatient scallywag i am i decided to put some effort in. It came off easily enough and in turn answered my question. Nope you can't convert a centri back to manual due to the small gear shaft length....the whole reason im having to do this is the covers cracked and i dont have a spare....

 

[Norman]

is that small gear shaft the shaft that carries through the engine case with the drive sprocket? I have a spare clutch and through shaft with all the needed parts to make it a manual clutch.
norman

 

[TigerToothBikes.com]

The shaft highlighted in your pic extends about an inch or so out and appears to be an entirely different shaft to one in pic.

 

[toytime]

Am I missing something? I thought those were just a bolt on kit.

 

[TigerToothBikes.com]

I'm rambling about a standard centrifugal engine not a bolt on kit type. I know the kits you mean though.

 

[Norman]

can you post a picture of what you have and what you need?