Okay the chainsaw came today. I have it open enough to tell what's what. So this is what it looks like at this point.
http://img593.imageshack.us/img593/5185/cs1h.jpg
I got the bar off and chain off I also have replaced the missing spark plug. I haven't been able to start it yet but I'm not surprised.
It's a 33cc poulan 25xx model. At least I think it's 33 cc. I poured a little gas in the tank probably not enough. Then a little in the plug hole probably too much. So now I'm waiting for it to sit a bit. I am going to try again.
Oh yeah I don't know if you can tell or not but the sprocket is NOT on the outside as I hoped. The clutch is. I found that a #25 chain will turn the sprocket but I doubt that it would last long since there are no teeth inside it. Then again it might still be hitting roller part of the chain. I'm going to have to give that some more thought,
I haven't taken the whole case apart yet. I'm hoping I won;t have to in order to make it work. However all options are open now. If anyone knows anything about any of this stuff jump right in. The more involved you are the better the chance I can make this work.
The engine is very light so the gravity or lift clutch would be easy to manage so it may go that way.
http://img593.imageshack.us/img593/5185/cs1h.jpg
I got the bar off and chain off I also have replaced the missing spark plug. I haven't been able to start it yet but I'm not surprised.
It's a 33cc poulan 25xx model. At least I think it's 33 cc. I poured a little gas in the tank probably not enough. Then a little in the plug hole probably too much. So now I'm waiting for it to sit a bit. I am going to try again.
Oh yeah I don't know if you can tell or not but the sprocket is NOT on the outside as I hoped. The clutch is. I found that a #25 chain will turn the sprocket but I doubt that it would last long since there are no teeth inside it. Then again it might still be hitting roller part of the chain. I'm going to have to give that some more thought,
I haven't taken the whole case apart yet. I'm hoping I won;t have to in order to make it work. However all options are open now. If anyone knows anything about any of this stuff jump right in. The more involved you are the better the chance I can make this work.
The engine is very light so the gravity or lift clutch would be easy to manage so it may go that way.