So after adjusting my engine mounts a bit since the engine had shifted to the left and was causing my chain to pop I started it up, it was a bit shakey but i figured that was due to changing out the stock 415 chain to a 41 chain thinking it just needed to stretch a bit. It ran fine at low rpm's but when i started accelerating it just made a fast whirring noise as if the flower nut was spinning freely, it accelerated a bit but wouldn't get going the way it would when i first started riding it. Like i said besides it running fairly rough it will put along at 5-10mph, any suggestions will help!
And if it makes a difference I've only put about 40 miles on the engine at most
And if it makes a difference I've only put about 40 miles on the engine at most