Re: No white wire and engine not firing?
Looks to me like the factory finally got smart and eliminated that stupid white wire that has caused so much trouble. Your magneto should function as it was designed to do.
If you don't have spark (ignition) start looking at other things like the connection at the plug and plug wire or your connections of the blue and black wires to the CDI.
If you're using the kit supplied plug-in connectores throw them in the trash and solder the splices and protect them with heat shrink tubing.
Also check the kill switch with an ohm meter to make sure it is 'open' (no continuity) with the button not pressed.
Let us known what you find.
Age and Treachery Will Always Triumph
Over Youth and Skill & "Charlie Don't Ride"
Last edited by 2door; 11-05-2012 at 09:08 PM.